26 lines
1.1 KiB
Markdown
26 lines
1.1 KiB
Markdown
# Esp32-Bulk-Keyboard
|
|
|
|
A Bulk Keyboard scripter. One Transmitter and Multi Receivers
|
|
|
|
Used a Esp32-S2 by wemos from Here:
|
|
https://a.co/d/cH3O1xc
|
|
|
|
There is will be two versions of the transmitter code. A shell version and a Webversion. The web version is to be used with a ESP2-S3 with Ethernet. Supports all keyboard, Mouse, and touch screen inputs.
|
|
|
|
Wemos Board Instructions:
|
|
(Shell Transmitter and Receivers)
|
|
Go to this link and flash the boards:
|
|
https://circuitpython.org/board/lolin_s2_mini/
|
|
|
|
After flashing copy all the files in each folder to the drive on the Esp32.
|
|
|
|
Done
|
|
|
|
To Connect to the Shell Transmitter, open a shell terminal, Like putty, find the open shell port, and set the baud to 115200. To see a list of all special commands type //help.
|
|
|
|
|
|
Note:
|
|
Receivers will hide their store drive after coping their files and a reboot. To make their drive appear short either pin 16 or 17 to Ground (GND), and press the reset button.
|
|
|
|
Limitations:
|
|
Since the Wemos board is the HID contoller. It is limited to USB 1.0 speeds. Chacters are printed at a rate about 1 / second. |