README.md

# Esp32-Bulk-Keyboard

A Bulk Keyboard scripter. One Transmitter and Multi Receivers

Used a Esp32-S2 by wemos from Here:
https://a.co/d/cH3O1xc

There is will be two versions of the transmitter code. A shell version and a Webversion. The web version is to be used with a ESP2-S3 with Ethernet. Supports all keyboard, Mouse, and touch screen inputs. 

Wemos Board Instructions:
(Shell Transmitter and Receivers)
Go to this link and flash the boards:
https://circuitpython.org/board/lolin_s2_mini/

After flashing copy all the files in each folder to the drive on the Esp32. 

Done

To Connect to the Shell Transmitter, open a shell terminal, Like putty, find the open shell port, and set the baud to 115200. To see a list of all special commands type //help. 


Note:
Receivers will hide their store drive after coping their files and a reboot. To make their drive appear short either pin 16 or 17 to Ground (GND), and press the reset button. 

Limitations:
Since the Wemos board is the HID contoller. It is limited to USB 1.0 speeds. Chacters are printed at a rate about 1 / second.
Initial commit 2025-11-13 21:35:34 +00:00			`# Esp32-Bulk-Keyboard`

Update README.md 2025-11-13 21:44:57 +00:00			`A Bulk Keyboard scripter. One Transmitter and Multi Receivers`

			`Used a Esp32-S2 by wemos from Here:`
			`https://a.co/d/cH3O1xc`

			`There is will be two versions of the transmitter code. A shell version and a Webversion. The web version is to be used with a ESP2-S3 with Ethernet. Supports all keyboard, Mouse, and touch screen inputs.`

			`Wemos Board Instructions:`
			`(Shell Transmitter and Receivers)`
			`Go to this link and flash the boards:`
			`https://circuitpython.org/board/lolin_s2_mini/`

			`After flashing copy all the files in each folder to the drive on the Esp32.`

			`Done`

Update README.md 2025-11-13 22:09:10 +00:00			`To Connect to the Shell Transmitter, open a shell terminal, Like putty, find the open shell port, and set the baud to 115200. To see a list of all special commands type //help.`


Update README.md 2025-11-13 22:06:09 +00:00			`Note:`
			`Receivers will hide their store drive after coping their files and a reboot. To make their drive appear short either pin 16 or 17 to Ground (GND), and press the reset button.`

Update README.md 2025-11-13 21:44:57 +00:00			`Limitations:`
			`Since the Wemos board is the HID contoller. It is limited to USB 1.0 speeds. Chacters are printed at a rate about 1 / second.`